- AutorIn
- Dr.-Ing. Wolfgang Gauchel
- Dipl.-Ing. Sebastian Haag
- Titel
- Servopneumatic Clamping System for the Assembly of Battery Cells in the Area of Electromobility
- Zitierfähige Url:
- https://nbn-resolving.org/urn:nbn:de:bsz:14-qucosa-200433
- Quellenangabe
- 10th International Fluid Power Conference (10. IFK) March 8 - 10, 2016, Vol. 3, pp. 137-148
- Quellenangabe
- Volume 3 – Conference: Thursday, March 10
- Auflage
- 1
- Erstveröffentlichung
- 2016
- Abstract (EN)
- This paper describes a new application for servopneumatic drives. In a battery module for automotive applications the pouch cells are clamped between frames. During the assembly the frames needs to be clamped permanently. So a clamping system comprising two drives was developed, which moves four clamp fingers each alternating. In the first chapter the application is described in detail. The second chapter includes a comparison of servoelectric and servopneumatic drives for this application with respect to energy consumption, installation space and purchase cost. The developed clamping unit is described in chapter three as well as a verification of the influence of the preload force on the straightness of the stack. At the end of this paper the conclusions are summed up.
- Freie Schlagwörter (EN)
- Battery Assembly, Comparison of drive technology
- Klassifikation (DDC)
- 620
- Klassifikation (RVK)
- ZQ 5460
- Publizierende Institution
- Technische Universität Dresden, Dresden
- Sonstige beteiligte Institution
- Dresdner Verein zur Förderung der Fluidtechnik e. V., Dresden
- URN Qucosa
- urn:nbn:de:bsz:14-qucosa-200433
- Veröffentlichungsdatum Qucosa
- 03.05.2016
- Dokumenttyp
- Konferenzbeitrag
- Sprache des Dokumentes
- Englisch
- Lizenz / Rechtehinweis