2008
Zugl.: Aachen, Techn. Hochsch., Diss., 2008
Zsfassung in engl. und dt. Sprache
Genehmigende Fakultät
Fak04
Hauptberichter/Gutachter
Tag der mündlichen Prüfung/Habilitation
2008-04-25
Online
URN: urn:nbn:de:hbz:82-opus-24225
URL: https://publications.rwth-aachen.de/record/50750/files/Schulz_Ingo.pdf
Einrichtungen
Inhaltliche Beschreibung (Schlagwörter)
Produktentwicklung (Genormte SW) ; Methodologie (Genormte SW) ; Produktmodell (Genormte SW) ; Systemtheorie (Genormte SW) ; Dialektik (Genormte SW) ; Technikphilosophie (Genormte SW) ; Ingenieurwissenschaften (frei) ; Konstruktionsmethodik (frei) ; TRIZ (frei) ; QFD (frei) ; Wertanalyse WA (frei) ; Axiomatic Design AD (frei) ; Prozessmodell (frei) ; Produktdatenmodell (frei) ; Organisationsmodell (frei) ; Product Development (frei) ; Methodology (frei) ; Product Model (frei) ; Systematic Engineering Design (frei) ; Systems Theory (frei) ; Dialectics (frei)
Thematische Einordnung (Klassifikation)
DDC: 620
Kurzfassung
Durch den zunehmenden Druck, die Entwicklungszeit und -kosten zu senken sowie die Produktqualität zu erhöhen, wurden in der Vergangenheit zahlreiche Methodiken der Produktentwicklung entworfen. In der Praxis zeigt sich jedoch, dass jede Methodik oft nur für einen speziellen Aspekt des Entwicklungsprozesses geeignet ist. Die gleichzeitige Anwendung unterschiedlicher Methodiken führt dazu, dass die entsprechenden Daten immer wieder neu aufbereitet werden müssen, was zu Zeit- und Qualitätsverlust und in deren Folge zu hohen Kosten führt. Daher wird in dieser Arbeit eine multimethodische Arbeitsumgebung entwickelt, die die vielfältigen Entwicklungsmethodiken in einer Metamethodik miteinander vereint und damit eine flexible, situationsadäquate Anwendung der Methodiken und ihrer Methoden erlaubt. Hierfür werden die Technikphilosophien „Systemtheorie“ und „Dialektik“ betrachtet, die die Grundlage verschiedener moderner Entwicklungsmethodiken darstellen, um darauf aufbauend ein generisches Rahmenmodell der Produktentwicklung zu entwerfen. Das Rahmenmodell ist die Grundlage für das Produktmodell mit den drei Teilmodellen „Produktdaten“, „Organisation“ und „Prozess“. Die Produktdaten beschreiben die Eigenschaften des Produkts, das Organisationsmodell bildet das Unternehmen ab. Das Prozessmodell bildet die Metamethodik der Produktentwicklung und wird aufbauend auf der Konstruktionsmethodik (KM), der Theorie des erfinderischen Problemlösens (TRIZ), dem Quality Function Deployment (QFD), dem Axiomatic Design (AD) und der Wertanalyse (WA) erstellt. Die Metamethodik der Produktentwicklung integriert all diese Methodiken, sodass es möglich wird, zu jedem Zeitpunkt der Entwicklung auf die am Besten geeignete Methode zuzugreifen und damit flexibel zwischen den Methodiken zu wechseln.Because of the increasing pressure to shorten development cycles, to lower development costs and to improve the product's quality there were proposed several product development and design methodologies in the past. In practice it became clear that each methodology is suitable for a certain situation but not for the whole process. The simultaneous use of different methodologies leads to recreating data again and again what causes a lack of cycle time, poor quality and for this reason loss of money. To overcome these shortcomings a multi-methodological working environment will be developed in this thesis which unifies different methodologies in one frame model, so that it will be possible to use methods of different methodologies in a flexible manner. For this purpose the two philosophies describing technique "Systems Theory" and "Dialectics" are the basis of a generic frame model for all phases of the product development process. The frame model, in turn, is the basis of the product model, which consists of three partial models, "product data", "organisation" and "process". The product data model describes the characteristics of the product, the organisation model describes the company. The process model forms a meta-methodology of product development and is based on Systematic Engineering Design (SED), Theory of Inventive Problem Solving (TRIZ/TIPS), Quality Function Deployment (QFD), Axiomatic Design (AD) and Value Analysis (VA). The meta-methodology integrates all mentioned development methodologies. Therewith it is possible to use the most suitable method at any time of the development process by changing the used methodology.
Fulltext:
PDF
Dokumenttyp
Dissertation / PhD Thesis
Format
online, print
Sprache
German
Interne Identnummern
RWTH-CONV-113283
Datensatz-ID: 50750
Beteiligte Länder
Germany
The record appears in these collections: |