Zertifizierbarer Entwicklungsprozess für komplexe Informationsverarbeitungssysteme in der Wägetechnik

The dissertation is about principles, methods and techniques during the systematic development of embedded systems in the domain of measurement techniques. The considered domain contains fields of application with challenging and specific requirements of the information processing system. E.g. the dynamic weighing systems need solutions with very high resolution and lowest achievable measurement uncertainty in order to perform high-speed-measurements in a mechanically disturbed environment. In particular, the abilities for official calibration and metrologic reliability are considered. The complex and high-performance functions are required to guarantee measurement results. FPGA-based systems are used for the implementation of these functions.The especially designed certifiable development process (ZEfIRA) provides a procedural method for the development of complex embedded systems. The metrologic reliability, the legal requirements like calibratability, the validation and the verification are included as a general criteria in the entire development process. ZEfIRA is based on the 3W-model and is designed in an evolutionary manner. This process starts with the analysis of a predecessor system followed by the model-based development of a prototype, which leads into an optimized and application-specific product solution.The study emphasizes the influence of challenging requirements on the measurement system. It will be presented, how these can be integrated into the modelling level during the design and the implementation on a FPGA-based target platform. The stages of the functional and technical design of the system are analysed, whereas the realization of the partitions “FPGA logic” and “FPGA softcore solutions” are discussed in detail.Based on the preliminary design of the information processing in an electromagnetic force compensation (EMC) scale, the applicability of the process ZEfIRA and its developed methods and principles are proved. On the one hand, the optimal system-specific algorithms of signal processing, control and safety and on the other hand whose technical implementation are essential. This was realized with different performance parameters. In addition, the prototype allows the possible comprehensive analysis for embedding system. In the conclusion, the performance of ZEfIRA based on the prototype development is evaluated.

Die Dissertation befasst sich mit Prinzipien, Methoden und Techniken der systematischen Entwicklung von komplexen Eingebetteten Systemen. Die betrachtete Domäne besitzt Anwendungsbereiche mit anspruchsvollen und besonderen Anforderungen an die Informationsverarbeitung. In der dynamischen Wägetechnik sind z.B. Lösungen mit sehr hohen Auflösungen und kleiner Messunsicherheit bei schnellen Messungen in einem mechanisch gestörten Umfeld notwendig. Die Anforderungen an die Eichfähigkeit und die Metrologische Sicherheit sind Besonderheiten. Es werden komplexe und hochleistungsfähige Funktionen zur Erzeugung der Messergebnisse verlangt. In der Arbeit werden dafür vorwiegend FPGA-basierte Eingebettete Systeme verwendet. Der entworfene zertifizierbare Prozess (ZEfIRA) bietet eine Vorgehensweise für die Entwicklung von Eingebetteten Systemen. Die Metrologische Sicherheit, die Eichfähigkeit, die Validier- und der Verifizierbarkeit werden als Kriterien im gesamten Entwurfsprozess berücksichtigt. ZEfIRA basiert auf einem 3W-Modell und ist evolutionär angelegt. Innerhalb des Prozesses werden die Analyse eines eventuellen Vorläufersystems sowie die modellbasierte prototypische Entwicklung bis hin zu einer produzierbaren Lösung (Produkt) durchgeführt. Die Arbeit verdeutlicht den großen Einfluss der spezifischen Anforderungen an das Messsystem. Es wird gezeigt, wie diese bereits zu der Entwurfszeit auf Modellebene und im Weiteren bei der Implementierung in einer FPGA-basierten Zielplattform berücksichtigt werden. Es werden verschiedene Schritte des funktionalen und technischen Systementwurfs untersucht und ausführlich die Realisierungspartitionen „FPGA-Logik“ und „FPGA-Softcore-Lösungen“ betrachtet. Als Beispiel zum Nachweis der Anwendbarkeit des Prozesses ZEfIRA dient die prototypische Entwicklung des Informationsverarbeitungssystems einer elektromagnetischen Kraftkompensationswaage (EMKW). Ausschlaggebend sind die optimal an das Gesamtsystem angepassten Signalverarbeitungs-, Regelungs- und Sicherheitsalgorithmen und deren technische Umsetzung. Dieses wurde mit verschiedenen Leistungsparametern, wie z.B. Latenz, Verarbeitungskomplexität und Genauigkeit realisiert. Ergänzend ermöglicht der Prototyp umfassende Analysemöglichkeiten für das Messsystem. Die abschließende Wertung ist eine Abschätzung der Leistungsfähigkeit von ZEfIRA auf Basis dieser prototypischen Entwicklung.

Zitieren

Zitierform:
Zitierform konnte nicht geladen werden.