Laser drop on demand joining as bonding method for electronics assembly and packaging with high thermal requirements
Files
Diss. Reihe Maschinenbau, Band 388
Language
Document Type
Issue Date
Issue Year
Authors
Editor
Publisher
ISBN
Abstract
In the scope of this work, a novel joining process was developed and investigated from both an application-driven and an academic point of view. The process utilises laser radiation to melt a CuSn-braze preform, which is subsequently detached from a ceramic capillary via inert gas overpressure. After a flight phase, the braze droplet impinges on the joining interface and wets the joining partners where it forms a metallurgical bond after solidification. This process is referred to as laser drop on demand joining (LDJ). It was shown that the shear strength of the joints exceeds the strength of standard tin-based solders by a factor of two and the joints are able to withstand the temperatures and forces occurring during an Al-Casting process. In addition, an ana-lytic model was developed, enabling to quantify the absorptance and thermal energy losses by heat convection, conduction, and radiation, by measuring the time required to melt the preform.
Abstract
Im Rahmen dieser Arbeit wurde ein neuartiger Fügeprozess entwickelt und sowohl aus anwendungsorientierter als auch aus wissenschaftlicher Sicht untersucht. Bei diesem Verfahren wird mittels Laserstrahlung ein CuSn-Löt-formteil aufgeschmolzen, und anschließend mittels Inertgasüberdruck aus einer keramischen Kapillare ausgetrieben. Nach einer Flugphase trifft der Löttropfen auf die Fügefläche und benetzt die Fügepartner, wo er nach der Erstarrung eine metallurgische Verbindung bildet. Dieser Prozess wird als Laser Drop on Demand Joining (LDJ) bezeichnet. Es konnte gezeigt werden, dass die Scherfestigkeit der Verbindungen die Festigkeit von Standardloten auf Zinnbasis um den Faktor zwei übersteigt und die erzeugte Verbindung zudem den Temperaturen und Scherkräften, die während des Al-Druckguss-prozesses auftreten widersteht. Darüber hinaus kann durch die Messung des zum Aufschmelzen des Lotformteils notwendigen Zeitraums eine Quantifizierung des Absorptionsgrades von Metallen sowie von Energieverlusten durch Konvektion, Konduktion und Wärmestrahlung möglich.