Festkörper-NMR-Untersuchungen an thermischen Abbauprodukten von flammgeschützten Polymeren

Solid state NMR investigations on thermal decomposition products of flame retarded polymers

Please always quote using this URN: urn:nbn:de:bvb:20-opus-26684
  • In der vorliegenden Arbeit wurden Untersuchungen an Rückständen von thermisch abgebauten, flammgeschützten Polymeren vorgenommen, mit dem Ziel, die Struktur und den Phasenbestand der eingebauten Flammschutzmittel und der Polymere sowie deren Wechselwirkungen als Funktion der Temperatur und umgebenden Atmosphäre (N2 und Luft) zu charakterisieren. Ein wichtiges Werkzeug, das Informationen über den amorphen Zustand der Abbauprodukte und deren thermisch bedingte Phasenumwandlungen in andere amorphe oder kristalline Strukturen sowie Aussagen überIn der vorliegenden Arbeit wurden Untersuchungen an Rückständen von thermisch abgebauten, flammgeschützten Polymeren vorgenommen, mit dem Ziel, die Struktur und den Phasenbestand der eingebauten Flammschutzmittel und der Polymere sowie deren Wechselwirkungen als Funktion der Temperatur und umgebenden Atmosphäre (N2 und Luft) zu charakterisieren. Ein wichtiges Werkzeug, das Informationen über den amorphen Zustand der Abbauprodukte und deren thermisch bedingte Phasenumwandlungen in andere amorphe oder kristalline Strukturen sowie Aussagen über die Nahordnungen der betrachteten Kernspinsorte liefert, stellt in dieser Arbeit der Einsatz der Festkörper-NMR-Spektroskopie dar. Hierbei sind neben Einzelimpuls- (SP), rotor-synchronisierte Spin-Echo- (RSE) und Kreuzpolarisationstechniken (CP) auch REDOR- (Rotational echo double resonance) und TRAPDOR- (Transfer of population in double resonance) Messungen zur Anwendung gekommen. Zusätzlich konnten aus den 11B- und 31P-NMR-Experimenten quantitative Aussagen über den relativen Borat- und Phosphor bzw. Phosphat-Anteil im festen Rückstand getroffen werden, wobei insbesondere für die 31P-Kerne eine quantitative Erfassung der kristallinen und amorphen Phosphatphasen durchgeführt wurde. Im ersten System wurden die Flammschutzmittel roter Phosphor (Prot) und Mg(OH)2 in HIPS kombiniert. Aus den Ergebnissen umfangreicher NMR-Experimente konnte abgeleitet werden, dass der größte Teil des eingesetzten Prot hauptsächlich in amorphen (Mg-Ortho-, -Di-, -Ketten- und Ringphosphaten) und weniger in kristallinen Phosphatphasen verbleibt. Zudem konnte für den Parameter der Temperatur und aus der Verfügbarkeit von Sauerstoff (N2-Atmosphäre/Luft) einen deutlicher Einfluss auf den Abbauprozess und die Bildung der Phosphatphasen (kristallin/amorph) nachgewiesen werden. Aus dem Vergleich der Ergebnisse der Temperversuche mit den Ergebnissen der Verbrennungsversuche im Cone Calorimeter konnte ein anaerober Abbauweg bestätigt werden. In einem zweiten System wurden die thermischen Reaktionen zwischen den Flammschutzadditiven BDP und Zinkborat sowie ihren Einfluss auf den thermischen Abbau eines PC/ABS-Blends untersucht. Der thermisch belastete Rückstand wird unabhängig von der Atmosphäre von amorphen Phosphatgruppen dominiert. Dabei konnten die während der Temperprozesse gebildeten Verbindungen α Zn3(PO4)2 und BPO4 als Folge einer Festphasenreaktion zwischen den eingesetzten Flammschutzadditiven identifiziert werden, wobei das α Zn3(PO4)2/BPO4 Verhältnis als Indikator für einen aeroben bzw. anaeroben Abbauprozess dient, der für die Feuerrückstände eindeutig einen anaeroben Abbau liefert.show moreshow less
  • This study aims at the structural characterisation of embedded flame retardants and polymers. Analysis includes determination of the phase contents as well as description of their mutual interactions as a function of their thermal history in different atmospheres (air and nitrogen). Solid-state NMR spectroscopy is the most important tool applied in this thesis. This technique enables structural information about the amorphous state of the decomposed products, determination of the thermal and thermo-oxidative conversion in different amorphousThis study aims at the structural characterisation of embedded flame retardants and polymers. Analysis includes determination of the phase contents as well as description of their mutual interactions as a function of their thermal history in different atmospheres (air and nitrogen). Solid-state NMR spectroscopy is the most important tool applied in this thesis. This technique enables structural information about the amorphous state of the decomposed products, determination of the thermal and thermo-oxidative conversion in different amorphous and crystalline structures, and predictions about the short-range order of the observed nuclei. In this context measurements of single pulse (SP), rotor-synchronised spin echo (RSE) and cross polarisation (CP) experiments, as well as REDOR (Rotational echo double resonance) and TRAPDOR- (Transfer of population in double resonance) have been conducted. Additionally, 11B SP and 31P RSE experiments have been used to study quantitatively the borate and both phosphorus and phosphate contents in the solid residues. Particular emphasis was put on quantifying crystalline and non-crystalline phosphate phases. The first system consists of a combination of the flame retardants red phosphorus (Pred) and Mg(OH)2 in HIPS. From the results of extensive NMR experiments it was deduced that most of inserted red phosphorus remains in amorphous phosphates phases (ortho, pyro, and chain/ring phosphates) besides some crystalline phosphate phases. Decomposition characteristics such as temperature and the availability of oxygen (N2 atmosphere/air) show a significant influence on the decomposition process and the formation of phosphate phases (crystalline/amorphous). By comparing the results of the annealing processes to the results of the cone calorimeter measurements an anaerobic decomposition way was confirmed. In a second system, thermal reactions between the two flame retardants BDP and zinc borate as well their influence on the thermal decomposition of a PC/ABS blend were investigated. The thermally residues are independently of the atmosphere dominated by amorphous phosphate units. During the thermal decomposition the formation of α-Zn3(PO4)2 and BPO4 could be identified as solid reaction products of the inserted flame retardants. In addition, the α Zn3(PO4)2/BPO4 ratio served as an indicator of aerobic or anaerobic decomposition processes, proving an anaerobic decomposition mechanism for the fire residues.show moreshow less

Download full text files

Export metadata

Additional Services

Share in Twitter Search Google Scholar Statistics
Metadaten
Author: Mario Augusto Fichera
URN:urn:nbn:de:bvb:20-opus-26684
Document Type:Doctoral Thesis
Granting Institution:Universität Würzburg, Fakultät für Chemie und Pharmazie
Faculties:Fakultät für Chemie und Pharmazie / Institut für Pharmazie und Lebensmittelchemie
Date of final exam:2007/11/16
Language:German
Year of Completion:2007
ISBN:978-3-9812072-1-7
Dewey Decimal Classification:5 Naturwissenschaften und Mathematik / 54 Chemie / 540 Chemie und zugeordnete Wissenschaften
GND Keyword:Festkörper-NMR-Spektroskopie; Flammschutzmittel; Phosphor; Phosphate; Polymere
Tag:amorph; kristallin
amorphous; crystalline; flame retardants; phosphorus; solid state NMR spectroscopy
Release Date:2008/03/26
Advisor:Prof. Dr. Ulrike Holzgrabe