- AutorIn
- M.Sc. Tom Petzold Technische Universität Chemnitz
- Univ.-Prof. Dr.-Ing. habil Dipl.-Phys. Matthias Hackert-OschätzchenOtto-von-Guericke Universität Magdeburg, Institut für Fertigungstechnik und Qualitätssicherung
- M. Sc. André MartinTechnische Universität Chemnitz
- Prof. Dr.-Ing. Andreas Schubert
- Titel
- Deburring and Edge Shaping by Electrochemical Machining with Differentially Switched Currents
- Zitierfähige Url:
- https://nbn-resolving.org/urn:nbn:de:bsz:ch1-qucosa2-725197
- Konferenz
- 15. International Symposium on Electrochemical Machining Technology. Saarbrücken, 14. - 15.11.2019
- Quellenangabe
- 15th International Symposium on Electrochemical Machining Technology INSECT
Herausgeber: Universität des Saarlands, Saarbrücken
Erscheinungsort: Saarbrücken
Erscheinungsjahr: 2019
Seiten: 172-179
ISBN: 978-3-00-064086-5 - Erstveröffentlichung
- 2019
- Abstract (EN)
- Manufacturing of components with complex internal features, e.g. for medical applications, aeronautics or automobile industry, is challenging. Those components are often machined in temporarily and locally separated production stages. As results of these separated stages form deviations and positioning errors increase, which lead to additional efforts for the quality assurance. The technology aimed within the project SwitchECM is expected to allow the machining of different complex features of one workpiece in one single production stage and shall simultaneously allow a high precision. For this purpose, a multi-cathode system will be developed, in which separated cathodes can be switched with specific parameters, depending on the requirements of the pre-defined features. This study will show the capability to machine the workpiece with different parameter sets but the same cathode and device as fundamental work for the machining with a multi-cathode system. Therefore the surface and dissolution characteristics for the material 1.4301 were used to design the process. The machining tasks were determined to deburring and edge shaping. In the experiments, the parameters voltage and working time were selected depending on the final geometry. It will be shown that the deburring task can be handled with nearly no edge shaping and the edge shaping task is suitable to adjust different edge geometries.
- Freie Schlagwörter (EN)
- SwitchECM, multi-cathode system, electrochemical machining
- Klassifikation (DDC)
- 500
- Normschlagwörter (GND)
- Elektrochemische Bearbeitung
- Publizierende Institution
- Universität des Saarlandes, Saarbrücken
- Technische Universität Chemnitz, Chemnitz
- Version / Begutachtungsstatus
- publizierte Version / Verlagsversion
- URN Qucosa
- urn:nbn:de:bsz:ch1-qucosa2-725197
- Veröffentlichungsdatum Qucosa
- 27.10.2020
- Dokumenttyp
- Konferenzbeitrag
- Sprache des Dokumentes
- Englisch