- AutorIn
- E. Starke Institute for Semiconductor and Microsystems Technology, Technische Universität Dresden
- U. MarschnerInstitute for Semiconductor and Microsystems Technology, Technische Universität Dresden
- A. B. FlatauUniversity of Maryland, Department of Aerospace Engineering
- J.-H. Yoo
- Titel
- Improved equivalent circuit modeling and simulation of magnetostrictive tuning fork gyro sensors
- Zitierfähige Url:
- https://nbn-resolving.org/urn:nbn:de:bsz:14-qucosa2-351369
- Konferenz
- SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. Portland, 25.-29. March 2017
- Quellenangabe
- Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017
Herausgeber: Jerome P. Lynch
Erscheinungsort: Bellingham, Wash.
Verlag: SPIE
Erscheinungsjahr: 2017
Titel Schriftenreihe: Proceedings of SPIE
Bandnummer Schriftenreihe: 10168 - Erstveröffentlichung
- 2017
- Abstract (EN)
- In this paper a new equivalent circuit is presented which describes the dynamics of a prototype micro-gyro sensor. The concept takes advantage of the principles employed in vibratory gyro sensors and the ductile attributes of GalFeNOL to target high sensitivity and shock tolerance. The sensor is designed as a tuning fork structure. A GalFeNOL patch attached to the y-z surface of the drive prong causes both prongs to bending the x-z plane (about the y axis) and a patch attached to the x-z surface of the sensing prong detects Coriolis-force induced bending in the y-z plane (about the x axis). A permanent magnet is bonded on top of each prong to give bias magnetic fields. A solenoid coil surrounding the drive prong is used to produce bending in the x-z plane of both prongs. The sensing prong is surrounded by a solenoid coil with N turns in which a voltage proportional to the time rate of change of magnetic flux is induced. The equivalent circuit enables the efficient modeling of a gyro sensor and an electromechanical behavioral simulation using the circuit simulator SPICE. The prongs are modeled as wave guiding bending beams which are coupled to the electromagnetic solenoid coil transducer. In contrast to known network approaches, the proposed equivalent circuit is the first tuning fork model, which takes full account of the fictitious force in a constant rotating frame of reference. The Coriolis force as well as the centrifugal force on a concentrated mass are considered.
- Andere Ausgabe
- Link zum Artikel, der zuerst in der Zeitschrift 'Proceedings of SPIE' erschienen ist.
DOI: 10.1117/12.2263973 - Freie Schlagwörter (DE)
- Stimmgabel-Kreiselsensor, Coriolis Kraftnetzmodell, Galfenol, Dynamisches Biegebalkenmodell, Modus Formen, Wellenleiter
- Freie Schlagwörter (EN)
- Tuning fork gyro sensor, Coriolis force network model, Galfenol, Dynamic bending beam model, Mode shapes, Wave guide
- Klassifikation (DDC)
- 620
- Verlag
- SPIE, Bellingham, Wash.
- Förder- / Projektangaben
- Office of Naval Research (ONR)
Multidisciplinary University Research Initiatives
 (MURI)
ID: N00014-06-1-0530
Alexander von Humboldt Foundation (AvH)
German-American Frontiers of Engineering Symposium follow up program
Connect (GAFOE) - Version / Begutachtungsstatus
- publizierte Version / Verlagsversion
- URN Qucosa
- urn:nbn:de:bsz:14-qucosa2-351369
- Veröffentlichungsdatum Qucosa
- 06.09.2019
- Dokumenttyp
- Konferenzbeitrag
- Sprache des Dokumentes
- Englisch
- Lizenz / Rechtehinweis