- Titel
- Volume 1 – Symposium: Tuesday, March 8
- Zitierfähige Url:
- https://nbn-resolving.org/urn:nbn:de:bsz:14-qucosa-196933
- Erschienen in
- 10th International Fluid Power Conference (10. IFK)
- Abstract (EN)
- Group A: Digital Hydraulics Group B: Intelligent Control Group C: Valves Group D | G | K: Fundamentals Group E | H | L: Mobile Hydraulics Group F | I: Pumps Group M: Hydraulic Components
- Freie Schlagwörter (DE)
- 10. IFK
- Freie Schlagwörter (EN)
- 10th IFK
- Klassifikation (DDC)
- 620
- Klassifikation (RVK)
- ZQ 5460
- Publizierende Institution
- Technische Universität Dresden, Dresden
- Sonstige beteiligte Institution
- Dresdner Verein zur Förderung der Fluidtechnik e. V., Dresden
- Fachverband Fluidtechnik im VDMA Verband Deutscher Maschinen- und Anlagenbau e.V., Frankfurt am Main
- URN Qucosa
- urn:nbn:de:bsz:14-qucosa-196933
- Veröffentlichungsdatum Qucosa
- 27.04.2016
- Dokumenttyp
- Konferenzband
- Sprache des Dokumentes
- Englisch
- Lizenz / Rechtehinweis
- Inhaltsverzeichnis
Group A: Digital Hydraulics Group B: Intelligent Control Group C: Valves Group D | G | K: Fundamentals Group E | H | L: Mobile Hydraulics Group F | I: Pumps Group M: Hydraulic Components
- High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup
- High-response hydraulic linear drive with integrated motion sensor and digital valve control
- Architecture, Control and NVH Development of Digital Hydraulics for Off-Highway Vehicle Applications
- The Control of Multiple Actuators using Single IEHEC Pump/Motor
- Active Vibration Control of Axial Piston Machine using Higher Harmonic Least Mean Square Control of Swash Plate
- Modiciency - Efficient industrial hydraulic drives through independent metering using optimal operating modes
- A Machine Learning Approach for Tracking the Torque Losses in Internal Gear Pump - AC Motor Units
- Advanced Proportional Servo Valve Control with Customized Control Code using White Space
- Improvement of the Vibration Prediction of a Poppet Valve in a Cavitation State
- Characteristics of Proportional Flow Control Poppet Valve with Pilot Pressure Compensation
- Hydraulic fluids with new, modern base oils – structure and composition, difference to conventional hydraulic fluids; experience in the field
- Experimental investigation of the Bunsen and the diffusion coefficients in hydraulic fluids
- Experimental measurements of bulk modulus for two types of hydraulic oil at pressures to 140MPa and temperatures to 180°C
- Innovative Duplex Filter for Hydraulic Applications
- A hydraulic test stand for demonstrating the operation of Eaton’s energy recovery system (ERS)
- Pressure compensator control – a novel independent metering architecture
- Potential in hydrostatic drive through intelligent mechanical solutions
- Reduction of System Inherent Pressure Losses at Pressure Compensators of Hydraulic Load Sensing Systems
- Validation of the physical effect implementation in a simulation model for the cylinder block/valve plate contact supported by experimental investigations
- An Investigation of the Impact of the Elastic Deformation of the End case/Housing on Axial Piston Machines Cylinder Block/Valve Plate Lubricating Interface
- Optimization of Axial Piston Units Based on Demand-driven Relief of Tribological Contacts
- Active Fluid Borne Noise Reduction for Aviation Hydraulic Pumps
- Simulation of the cavitating flow in a model oil hydraulic spool valve using different model approaches
- Visualization of cavitation and investigation of cavitation erosion in a valve
- Comparison of spool radial grooves influence between water and oil hydraulics
- Effects of air dissolution dynamics on the behaviour of positive-displacement vane pumps: a simulation approach
- Performance of an electro-hydraulic active steering system
- Energy-efficient steering systems for heavy-duty commercial vehicles
- Automated calibration of a tractor transmission control unit
- A telehandler vehicle as mobile laboratory for hydraulic-hybrid powertrain technology development
- Development of innovative solutions for displacement variation in hydrostatic machines
- Experimental loss analysis of displacement controlled pumps
- A General Method to Determine the Optimal Profile of Porting Grooves in Positive Displacement Machines: the Case of External Gear Machines
- A Lumped Parameter Approach for GEROTOR Pumps: Model Formulation and Experimental Validation
- Slip length of the tribo system steel-polyalphaolefin-steel determined by a novel tribometer
- Reducing Friction and Leakage by Means of Microstructured Sealing Surfaces – Example Mechanical Face Seal
- Heat Exchanger Design in Mobile Machines
- Numerical Simulation of Transient Diabatic Pipe Flow by using the Method of Characteristics
- Development of a Simulation Model of a Self-Energizing Hydraulic Brake to Actively Compensate Brake Torque Oscillations
- Hydraulic Energy Recovery System Utilizing a Thermally Regenerative Hydraulic Accumulator Implemented to a Reach Truck
- A Study on Integration of Energy Harvesting System and Semi-Active Control for a Hydraulic Suspension System
- Design and Realization of an Adjustable Fluid Powered Piston for an Active Air Spring
- Dirt Ingress Behavior of Wipers for Hydraulic Cylinders
- Experimental Investigation of the Air Release in Hydraulic Reservoirs
- An approach to optimize the design of hydraulic reservoirs
- Development of hydraulic tanks by multi-phase CFD simulation