- AutorIn
- Chote Soranakom
- Barzin Mobasher
- Titel
- Flexural Analysis and Design of Textile Reinforced Concrete
- Zitierfähige Url:
- https://nbn-resolving.org/urn:nbn:de:bsz:14-ds-1244046537373-61938
- Quellenangabe
- Textilbeton – Theorie und Praxis : Tagungsband zum 4. Kolloquium zu Textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6. - 5.6.2009. - Dresden, 2009. - S. 273 - 288
- Abstract (EN)
- A model is presented to use normalized multi-linear tension and compression material characteristics of strain-hardening textile reinforced concrete and derive closed form expressions for predicting moment-curvature capacity. A set of design equations are derived and simplified for use in spreadsheet based applications. The model is applicable for both strain-softening and strainhardening materials. The predictability of the simplified model is checked by model calibration and development of design charts for moment capacity and stress developed throughout the cross section of a flexural member. Model is calibrated by predicting the results of Alkali Resistant Glass and Polyethylene fabrics. A case for the flexural design of Glass Fiber Reinforced Concrete (GFRC) specimen as a simply supported beam subjected to distributed load is used to demonstrate the design procedure.
- Freie Schlagwörter (EN)
- AR-glass, glass fabric, stress-strain curves, flexural response, cracking, modulus of rupture, bending, curvature, moment-curvature, back-calculation
- Klassifikation (DDC)
- 620
- Klassifikation (RVK)
- ZI 2000
- Verlag
- Technische Universität Dresden, Dresden
- URN Qucosa
- urn:nbn:de:bsz:14-ds-1244046537373-61938
- Veröffentlichungsdatum Qucosa
- 03.06.2009
- Dokumenttyp
- Artikel
- Sprache des Dokumentes
- Englisch
- Lizenz / Rechtehinweis