Abstract
The French construction industry generates almost 250 million tons of mineral waste per year. This waste can be used, after preparation, to replace natural materials used for construction work. This can preserve natural resources by contributing to a circular economy. A better understanding is necessary with regards to the deconstruction waste behaviour when used in redevelopment project or construction work, as backfill or embankments. This article intends to better understand how crushing influences recycled concrete aggregates leaching behaviour. Four concrete samples were studied from French power plant deconstructions. The leaching behaviour, of different grain size classifications, was tested with standard (i.e. with size reduction < 4 mm) and non-standard leaching tests (i.e. without size reduction). The samples were crushed with different industrial tools. The results showed that the final products maximum grain-size (Dmax) for crushing operation seems to have an influence on fine grain production. The role of the crushing technique used still remains uncertain. The analytical results from the leaching tests showed that the major elements leached are calcium, sulphates, carbonates, potassium, aluminium and silica. The trace elements were usually found in the smallest grain-size classification (0–6 mm). For the standard leaching tests, the total dissolved solids rose for the larger grain size classifications, whereas for non-standard leaching tests (performed without size reduction) the opposite occurred. All samples followed the environmental acceptability requirements. It seems essential to control the crushing parameters to sustain and strengthen continued concrete waste recovery to help improve French and European waste recovery objectives.
Similar content being viewed by others
Notes
An alternative material is any material manufactured from waste and intended for use alone or mixed with other alternative or conventional materials.
References
ADEME French Agency for Environment and Energy Management (December 2014) Construction Waste, technical Report.
Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste, (1999).
Council Decision DC 2003/33/EC of 19 December 2002. Establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 and Annex II to Directive 1999/31/EC, (2002).
Commissioner-General for Sustainable Development, Figures and statistics n°164 254 Million tons of waste produced by construction sector in France in 2008 (in French: http://www.statistiques.developpement-durable.gouv.fr/publications/p/130/856/254-millions-tonnes-dechets-produits-lactivite-construction.html, http://www.statistiques.developpementdurable.gouv.fr/) (October 2010). Accessed 9 June 2016
UNPG National Union of Aggregate Producers. (2015) French Aggregates Industry in 2014 (in French: http://www.unpg.fr/dossiers/biblioth_que/granulats_les_chiffres_cles_2014, Accessed 9 June 2016.
CEREMA (2016) Acceptability of Alternative Materials in Road Construction, Environmental Assessment Technical department for transport, roads and bridges (March 2016).
RECYBETON—Complete recycling of concrete, (in French: http://www.pnrecybeton.fr/en, Accessed 9 June 2016 (2012–2016).
Tränkler, J., Walker, I., Dohmann, M., Environmental impact of demolition waste—an overview on 10 years of research and experience. Waste Manag. 16(1–3), 21–26, (1996).
Akbarnezhad A., Ong K. C. G., Separation processes to improve the quality of recycled concrete aggregates (RCA). In: K. C. G. ONG. Handbook of Recycled Concrete and Demolition Waste, pp. 246–269. National University of Singapore, Singapore (2013). doi:10.1533/9780857096906.2.246
Rodrigues, F., Carvalho, M. T., Evangelista, L., Brito, J.: Physical, chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants. J. Cleaner Prod. 438–445 (2013). doi:10.1016/j.jclepro.2013.02.023
Engelsen, C. J., Sloot, H. A., Wibetoe, G., Petkovic, G., Stoltenberg-Hansson, E., Lund, W.: Release of major elements from recycled concrete aggregates and geochemical modelling. Cem. Concr. Res. 39, 446–459 (2009). doi:10.1016/j.cemconres.2009.02.001
Engelsen, C. J., Sloot, H. A., Wibetoe, G., Justnes, H., Lund, W., Stoltenberg-Hansson, E.: Leaching characterisation and geochemical modelling of minor and trace elements released from recycled concrete aggregates. Cem. Concr. Res. 40, 1639–1649 (2010). doi:10.1016/j.cemconres.2010.08.001
Galvín, A. P., Ayuso, J., Jiménez, J. R., Agrela, F.: Comparison of batch leaching tests and influence of pH on the release of metals from construction and demolition wastes. Waste Manage. (Oxford). 32, 88–95 (2012). doi:10.1016/j.wasman.2011.09.010
Galvín, A. P., Ayuso, J., García, I., Jimenez, J. R., Gutierrez, F.: The effect of compaction on the leaching and pollutant emission time of recycled aggregates from construction and demolition waste. J. Cleaner Prod. 83, 294–304 (2014). doi:10.1016/j.jclepro.2014.07.074
Galvín, A., Agrela, F., J. A., Beltrán, M., Barbudo, A., Leaching assessment of concrete made of recycled coarse aggregate: physical and environmental characterisation of aggregates and hardened concrete. Waste Manag. 34, 1693–1704 (2014). doi:10.1016/j.wasman.2014.05.001
Vegas, I., Ibañez, J.A., Lisbona, A., Sáez de Cortazar, A., Frías, M.: Pre-normative research on the use of mixed recycled aggregates in unbound road sections. Constr. Build. Mater. 25, 2674–2682 (2011). doi:10.1016/j.conbuildmat.2010.12.018
Butera, S., Christensen, T. H., Astrup, T. F.: Composition and leaching of construction and demolition waste: inorganic elements and organic compounds. J. Hazard. Mat. 276, 302–311 (2014). doi:10.1016/j.jhazmat.2014.05.033
Limbachiya, M., Marrocchino, E., Koulouris, A.: Chemical–mineralogical characterisation of coarse recycled concrete aggregate. Waste Manage. (Oxford). 27, 201–208 (2007). doi:10.1016/j.wasman.2006.01.005
Sánchez de Juan, M., Gutiérrez, P.A.: Study on the influence of attached mortar content on the properties of recycled concrete aggregate. Constr. Build. Mater. 23, 872–877 (2009). doi:10.1016/j.conbuildmat.2008.04.012
Van der Sloot, H.A.: Comparison of the characteristic leaching behavior of cements using standard (EN 196-1) cement mortar and an assessment of their long-term environmental behavior in construction products during service life and recycling. Cem. Concr. Res. 30, 1079–1096 (2000)
ADEME. French Agency for Environment and Energy Management Study of characterization of alternative materials from platforms for sorting and recycling of building and public works waste 2011, (2012).
Mulugeta, M., Engelsen, C. J., Wibetoe, G., Lu, W.: Charge-based fractionation of oxyanion-forming metals and metalloids leached from recycled concrete aggregates of different degrees of carbonation: A comparison of laboratory and field leaching tests. Waste Manage. (Oxford). 31, 253–258 (2011). doi:10.1016/j.wasman.2010.05.003
Chen, J., & Brown, B. Leaching characteristics of recycled aggregate used as road base. University of Wisconsin system solid waste research program Student Project Report, (2012).
Engelsen, C. J., Wibetoe, G., Sloot, H. A., Lund, W., Petkovic, G.: Field site leaching from recycled concrete aggregates applied as sub-base material in road construction. Sci. Total Environ. 427–428, 86–97 (2012). doi:10.1016/j.scitotenv.2012.04.021
Bianchini, G., Marrocchino, E., Tassinari, R., Vaccaro, C.: Recycling of construction and demolition waste materials: a chemical–mineralogical appraisal. Waste Manage. (Oxford). 25, 149–159 (2005). doi:10.1016/j.wasman.2004.09.005
Boesman, B. Crushing and separating techniques for demolition material. EDA (European Demolition Association) /RILEM Conference on Demo-Recycling. Part 2. Reuse of concrete and brick materials, Rotterdam (1985).
Vernus, E., Environmental behaviour characterisation of recycled concrete—leaching behaviour observable differences between recycled concrete and control concrete. RECYBETON congress 16/06/2015 (in French: http://www.pnrecybeton.fr/wp-content/uploads/2015/06/03-1_RECYBETON_colloque2015_PROVADEMSE.pdf), (2015), Accessed 9 June 2016
AFNOR. French Agency for Standardization NF EN 932-1—Tests for general properties of aggregates—Part 1: Methods for sampling, (1996).
AFNOR. French Agency for Standardization NF ISO 565—Test sieves—Metal wire cloth, perforated metal plate an electroformed sheet - Nominal sizes of openings, (1990).
AFNOR. French Agency for Standardization NF EN 933–10—Tests for geometrical of aggregates—Part 10: Assessment of fines - Grading of fillers aggregates (air jet sieving), (2009).
AFNOR. French Agency for Standardization NF ISO 14869-2—Dissolution for the determination of total element content—Part 2: dissolution by alkaline fusion, (2002).
AFNOR. French Agency for Standardization NF EN 196-2—Methods of testing cement—Part 2: chemical analysis of cement, (2013).
AFNOR. French Agency for Standardization NF EN 12457-2—Characterization of waste—Leaching—Compliance test for leaching of granular waste materials and sludges—Part 2 : one stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) ( 2002).
AFNOR. French Agency for Standardization French standard NF EN 13285—Unbound mixtures—Specifications, (2010).
Acknowledgements
The authors thank the Ministère de l’Environnement, de l’Énergie et de la Mer (the French Ministry of Environment, Energy and Sea) for their financial support. The authors are grateful for EDF CIT and EDF CIDEN for providing access to the industrial sites during the deconstruction. Many thanks to Nicolas Lambert, Catherine Ollivier, Violaine Brochier for technical support and assistance in the field. The authors thank the recovery companies CLAMENS and YPREMA for their collaboration on the recovery platforms.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Coudray, C., Amant, V., Cantegrit, L. et al. Influence of Crushing Conditions on Recycled Concrete Aggregates (RCA) Leaching Behaviour. Waste Biomass Valor 8, 2867–2880 (2017). https://doi.org/10.1007/s12649-017-9868-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12649-017-9868-2