Abstract
In this paper, the microstructural and chemical characterization of the IN738LC superalloy, coated with a Pt-Cr modified aluminide coating, is presented. The effects of aging in air at 850 °C on superalloy and coating microstructures were investigated. The growth of γ′ precipitates in IN738LC follows the Wagner-Lifshits model. The positive effect of Pt in preventing refractory element diffusion into the outer coating is not influenced by the aging. A moderate precipitation of TCP phases has been noted at the coating-superalloy interface.
Similar content being viewed by others
References
R. Streiff: in Elevated Temperature Coatings: Science and Technology II, N.B. Dahotre, and J.M. Hampikian, eds., TMS, Warrendale, PA, 1996, pp. 407–16.
R. Mevrel, C. Duret, and R. Pichoir: Mater. Sci. Technol., 1986, vol. 2, pp. 201–6.
M.F. Stroosnijeder, M.J. Bennett, and R. Mevrel: in Advanced Techniques for Surface Engineering, W. Gissler, and H.A. Jehn, eds., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1992, pp. 335–58.
H.M. Tawancy, N.M. Abbas, and T.N. Rhys-Jones: Surf. Coating Technol., 1991, vol. 49, pp. 1–7.
T.N. Rhys-Jones, and N. Swindells: Mater. Sci. Eng., 1987, pp. 389–97.
M.R. Jackson, and J.R. Rairden: Metall. Trans. A, 1977, vol. 8A, pp. 1697–707.
J.H. Sun, H.C. Jang, and E. Chang: Surf. Coating Technol., 1994, vol. 64, pp. 195–203.
G.H. Marijnissen: in High Temperature Protective Coatings, S.C. Singhal, ed., TMS-AIME, Warrendale, PA, 1983, pp. 27–35.
R.A. Stevens, and P.E. Flewitt: Mater. Sci. Eng., 1979, vol. 37, pp. 237–47.
D. McLean: Met. Sci., 1984, vol. 18, pp. 249–56.
Y. Yoshioka, N. Okabe, T. Okamura, D. Saito, K. Fujiyama, and H. Kashiwaya: Superalloys, R.D. Kissinger, et al., eds., TMS, 1996, pp. 173–79.
W.F. Gale, and J.E. King: Mater. Sci. Technol., 1986, vol. 2, pp. 201–06.
G.P. Sabol, and R. Stickler: Phys. Status Solidi, 1969, vol. 35 (11), pp. 11–52.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Calliari, I., Dabalà, M. & Zambon, A. Microstructural characterization of a Pt-aluminide coated IN738LC. J. of Materi Eng and Perform 10, 258–262 (2001). https://doi.org/10.1361/105994901770344962
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1361/105994901770344962