Skip to main content
SpringerLink
Log in

Hot Deformation Behavior of a Novel Ni-Cr-Mo-B Ultra-heavy Plate Steel by Hot Compression Test

  • Material
  • Published:
Journal of Iron and Steel Research International Aims and scope Submit manuscript

Abstract

Hot deformation behavior of a novel Ni-Cr-Mo-B heavy plate steel was studied by hot compression tests, which were conducted on a Gleeble-3800 thermo-mechanical simulator corresponding to the temperature range of 850—1150 °C with the strain rates of 0. 01 — 10 s–1 and the true strain of 0. 8. The results suggest that the majority of flow curves exhibit a typical dynamic recrystallization (DRX) behavior with an apparent single peak stress followed by a gradual fall towards a steady-state stress. Important characteristic parameters of flow behavior as critical stress/strain for initiation of DRX and peak and steady-state stress/strain were derived from curves of strain hardening rate versus stress and stress versus strain, respectively. Material constants of the investigated steel were determined based on Arrhenius-type constitutive equation, and then the peak stress was predicted by the equation with the hot deformation activation energy of 379139 J/mol, and the predicted values agree well with the experimental values. Furthermore, the effect of Zener-Hollomon parameter on the characteristic points of flow curves was studied using the power law relation, and the ratio of critical stress and strain to peak stress and strain were found to be 0.91 and 0.46, respectively.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. T. L. Fu, Z. D. Wang, Y. Li, J. D. Li, G. D. Wang, Appl. Therm. Eng. 70 (2014) 800–807.

    Article  Google Scholar 

  2. X. Y. Wang, T. Pan, H. Wang, H. Su, X. Y. Li, X. Z. Cao, Acta Metall. Sin. 48 (2012) 401–406.

    Article  Google Scholar 

  3. T. Pan, X. Y. Wang, H. Wang, Y. Li, H. Su, C. F. Yang, J. Iron Steel Res. Int. 18 (2011) 242–245.

    Google Scholar 

  4. T. Pan, X. Y. Wang, H. Su, C. F. Yang, Acta Metall. Sin. 50 (2014) 431–438.

    Google Scholar 

  5. D. Zhang, Y. Liu, L. Zhou, Q. Han, B. Jiang, Z. Li, J. Iron Steel Res. Int. 21 (2014) 1042–1048.

    Article  Google Scholar 

  6. Y. C. Lin, Y. Ding, M. S. Chen, J. Deng, Mater. Des. 52 (2013) 118–127.

    Article  Google Scholar 

  7. D. Samantaray, S. Mandai, A. K. Bhaduri, Mater. Sci. Eng. A 528 (2011) 5204–5211.

    Article  Google Scholar 

  8. E. I. Poliak, J. J. Jonas, Acta Mater. 44 (1996) 127–136.

    Article  Google Scholar 

  9. D. J. Li, Y. R. Feng, Z. F. Yin, F. S. Shangguan, K. Wang, Q. Liu, F. Hu, Mater. Sci. Eng. A 528 (2011) 8084–8089.

    Article  Google Scholar 

  10. H. Mirzadeh, J. M. Cabrera, J. M. Prado, A. Najafizadeh, Mater. Sci. Eng. A 528 (2011) 3876–3882.

    Article  Google Scholar 

  11. I. Mejia, A. Bedolla-Jacuinde, C. Maldonado, J. M. Cabrera, Mater. Sci. Eng. A 528 (2011) 4133–4140.

    Article  Google Scholar 

  12. K. Wu, G. Q. Liu, B. F. Hu, F. Li, Y. W. Zhang, Y. Tao, J. T. Liu, Mater. Des. 32 (2011) 1872–1879.

    Article  Google Scholar 

  13. X. Xiao, G. Q. Liu, B. F. Hu, X. Zheng, L. N. Wang, S. J. Chen, A. Ullah, Comput. Mater. Sci. 62 (2012) 227–234.

    Article  Google Scholar 

  14. Y. H. Xiao, C. Guo, X. Y. Guo, Mater. Sci. Eng. A 528 (2011) 6510–6518.

    Article  Google Scholar 

  15. H. Y. Li, Y. H. Li, X. F. Wang, J. J. Liu, Y. Wu, Mater. Des. 49 (2013) 493–501.

    Article  Google Scholar 

  16. D. L. Baragar, J. Mech. Work. Technol. 14 (1987) 295–307.

    Article  Google Scholar 

  17. A. Dehghan-Manshadi, M. R. Barnett, P. D. Hodgson, Mater. Sci. Eng. A 485 (2008) 664–672.

    Article  Google Scholar 

  18. H. Mirzadeh, A. Najafizadeh, M. Moazeny, Metall. Mater. Trans. A 40 (2009) 2950–2958.

    Article  Google Scholar 

  19. C. Zener, J. H. Hollomon, J. Appl. Phys. 15 (1944) 22–32.

    Article  Google Scholar 

  20. E. I. Poliak, J. J. Jonas, ISIJ Int. 43 (2003) 684–691.

    Article  Google Scholar 

  21. H. L. Wei, G. Q. Liu, X. Xiao, H. T. Zhao, H. Ding, R. M. Kang, Mater. Sci. Eng. A 564 (2013) 140–146.

    Article  Google Scholar 

  22. H. Mirzadeh, A. Najafizadeh, Mater. Chem. Phys. 116 (2009) 119–124.

    Article  Google Scholar 

  23. R. Ding, Z. X. Guo, Acta Mater. 49 (2001) 3163–3175.

    Article  Google Scholar 

  24. G. R. Stewart, A. M. Elwazri, S. Yue, J. J. Jonas, Mater. Sci. Tech. Lond. 22 (2006) 519–524.

    Article  Google Scholar 

  25. L. Ma, L. Wang, Z. Liu, G. Yang, L. Lu, M. Peng, J. Iron Steel Res. Int. 21 (2014) 1035–1041.

    Article  Google Scholar 

  26. C. M. Sellars, W. J. McTegart, Acta Metall. 14 (1966) 1136–1138.

    Article  Google Scholar 

  27. Z. Y. Chen, S. Q. Xu, X. H. Dong, Acta Metall. Sin. 21 (2008) 451–458.

    Article  Google Scholar 

  28. H. J. McQueen, N. D. Ryan, Mater. Sci. Eng. A 322 (2002) 43–63.

    Article  Google Scholar 

  29. H. J. McQueen, S. Yue, N. D. Ryan, E. Fry, J. Mater. Process. Technol. 53 (1995) 293–310.

    Article  Google Scholar 

  30. H. T. Zhao, G. Q. Liu, L. Xu, Mater. Sci. Eng. A 559 (2013) 262–267.

    Article  Google Scholar 

  31. J. M. Cabrera, A. Al Omar, J. M. Prado, J. J. Jonas, Metall. Mater. Trans. A 28 (1997) 2233–2244.

    Article  Google Scholar 

  32. D. Samantaray, S. Mandai, A. K. Bhaduri, Mater. Des. 32 (2011) 2797–2802.

    Article  Google Scholar 

  33. M. Shaban, B. Eghbali, Mater. Sci. Eng. A 527 (2010) 4320–4325.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, 100083, Beijing, China

    Zhi-yu Gao (Doctor Candidate) & Guo-quan Liu (Doctor, Professor)

  2. College of Materials Science and Engineering, Liaoning Technical University, 123099, Fuxin, Liaoning, China

    Zhi-yu Gao (Doctor Candidate)

  3. Division of Engineering Steel, Central Iron and Steel Research Institute, 100081, Beijing, China

    Tao Pan, Zhuo Wang & Hang Su

  4. School of Materials Science and Engineering, University of Science and Technology Beijing, 100083, Beijing, China

    Guo-quan Liu (Doctor, Professor)

  5. Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, 100083, Beijing, China

    Guo-quan Liu (Doctor, Professor)

Authors
  1. Zhi-yu Gao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Tao Pan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhuo Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Guo-quan Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Hang Su
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Zhi-yu Gao or Guo-quan Liu.

Additional information

Foundation Item: Item Sponsored by National Natural Science Foundation of China (51071019, 51371030); National High Technology Research and Development Program of China (2013AA031601); National Key Technology Research and Development Program of the Ministry of Science and Technology of China (2011BAE25B01)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gao, Zy., Pan, T., Wang, Z. et al. Hot Deformation Behavior of a Novel Ni-Cr-Mo-B Ultra-heavy Plate Steel by Hot Compression Test. J. Iron Steel Res. Int. 22, 818–826 (2015). https://doi.org/10.1016/S1006-706X(15)30076-5

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1016/S1006-706X(15)30076-5

Key words

Search

Navigation