KIT | KIT-Bibliothek | Impressum | Datenschutz

An approach to wear simulation of hydrostatic drives to improve the availability of mobile machines

Brinkschulte, Lars; Mattes, Janina; Geimer, Marcus

Abstract (englisch):

Wear in swashplate type axial piston pumps mainly occurs in three tribological contact pairs. These are swashplate-slipper, piston-cylinder and cylinderblock-valveplate. This article focuses on a simulation model, based on the approach of Archard and Fleischer, to predict the wear in the pistoncylinder contact. Besides general geometric data, the exact piston and cylinder contours and the wear-induced material removal over time are taken into account. A special focus in the simulation is on the investigation of the dependency of the viscosity of the hydraulic fluid on the wear. First results from test runs demonstrate a good correspondence between the simulation and measured wear on a test bench.


Verlagsausgabe §
DOI: 10.5445/IR/1000081375
Originalveröffentlichung
DOI: 10.18154/RWTH-2018-224523
Cover der Publikation
Zugehörige Institution(en) am KIT Institut für Fahrzeugsystemtechnik (FAST)
Publikationstyp Proceedingsbeitrag
Publikationsjahr 2018
Sprache Englisch
Identifikator ISBN: 978-3-95886-215-9
urn:nbn:de:swb:90-813754
KITopen-ID: 1000081375
Erschienen in Fluid power networks : proceedings : 11th International Fluid Power Conference (IFK), Aachen, 19.-21. März 2018. Vol. 1. Ed.: H. Murrenhoff
Verlag RWTH Aachen
Seiten 392 - 407
Schlagwörter swashplate type axial piston pump; piston-cylinder contact; fluid film; wear simulation; influence of viscosity; experiment
KIT – Die Forschungsuniversität in der Helmholtz-Gemeinschaft
KITopen Landing Page