KIT | KIT-Bibliothek | Impressum | Datenschutz

Influence of Hot Plastic Deformation in γ and (γ + α) Area on the Structure and Mechanical Properties of High-Strength Low-Alloy (HSLA) Steel

Sas, Jan 1; Kvačkaj, Tibor; Milkovič, Ondrej; Zemko, Michal
1 Institut für Technische Physik (ITEP), Karlsruher Institut für Technologie (KIT)

Abstract (englisch):

The main goal of this study was to develop a new processing technology for a high-strength low-alloy (HSLA) steel in order to maximize the mechanical properties attainable at its low alloy levels. Samples of the steel were processed using thermal deformation schedules carried out in single-phase (γ) and dual-phase (γ + α) regions. The samples were rolled at unconventional finishing temperatures, their final mechanical properties were measured, and their strength and plasticity behavior was analyzed. The resulting microstructures were observed using optical and transmission electron microscopy (TEM). They consisted of martensite, ferrite and (NbV)CN precipitates. The study also explored the process of ferrite formation and its influence on the mechanical properties of the material.


Volltext §
DOI: 10.5445/IR/1000064124
Originalveröffentlichung
DOI: 10.3390/ma9120971
Scopus
Zitationen: 10
Web of Science
Zitationen: 9
Dimensions
Zitationen: 8
Cover der Publikation
Zugehörige Institution(en) am KIT Institut für Technische Physik (ITEP)
Publikationstyp Zeitschriftenaufsatz
Publikationsjahr 2016
Sprache Englisch
Identifikator ISSN: 1996-1944
urn:nbn:de:swb:90-641247
KITopen-ID: 1000064124
HGF-Programm 31.03.04 (POF III, LK 01) Fusionsmagnete und Magnetkomponenten
Erschienen in Materials
Verlag MDPI
Band 9
Heft 12
Seiten 971
Bemerkung zur Veröffentlichung Gefördert durch den KIT-Publikationsfonds
Nachgewiesen in Dimensions
Scopus
Web of Science
KIT – Die Forschungsuniversität in der Helmholtz-Gemeinschaft
KITopen Landing Page